Siemens S223 User Manual

UMN:CLI                                                                                                                                                              User  Manual 

SURPASS hiD 6615 S223/S323 R1.5 

42                                                                         A50010-Y3-C150-2-7619 

To disable password encryption, use the following command. 

Global 

Disables password encryption. 

 

To configure a password for created account, use the following command. 

 [NAME] 

Global 

Configures a password for created account. 

 

The following is an example of changing password. 

SWITCH(config)# passwd Siemens 

Changing password for Siemens 

Enter the new password (minimum of 5, maximum of 8 characters) 

Please use a combination of upper and lower case letters and numbers. 

Enter new password:junior95 

Re-enter new password:junior95 

Password changed. 

SWITCH(config)# 

 

The password you are entering won’t be seen in the screen, so please be careful not to 
make mistake. 

 

 

For the hiD 6615 S223/S323, the administrator can create a system account. In addition, 
it is possible to set the security level from 0 to 15 to enhance the system security. 

To create a system account, use the following command. 

user add NAME DESCRIPTION 

Creates a system account. 

user add NAME  level

 <0-15> 

DESCRIPTION 

Global 

Creates a system account with a security level. 

 

The account of level 0 to level 14 without any configuring authority only can use exit and 
help

 in Privileged EXEC View mode and cannot access to Privileged EXEC Enable mode. 

The account with the highest level 15 has a read-write authority.