Manualsbrain.com
  1. Manuals
  2. Brands
  3. Siemens
  4. S223
  5. User Manual

Siemens S223 User Manual

Download
Page of 381
UMN:CLI                                                                                                                                                              User  Manual 
SURPASS hiD 6615 S223/S323 R1.5 
58                                                                         A50010-Y3-C150-2-7619 
4.3.3 Assigning 
IP 
Address to Network Interface 
After enabling interface, you need to assign IP address. To assign IP address to specified 
network interface, use the following command. 
Command Mode 
Description 
ip address
 IP-ADDRESS/M 
Assigns IP address to an interface. 
ip address
 IP-ADDRESS/M secondary 
Interface 
Assigns secondary IP address to an 
interface. 
 
To disable the assigned IP address, use the following command. 
Command Mode 
Description 
no ip address
 IP-ADDRESS/M 
Removes assigned IP address to an interface. 
no ip address
  IP-ADDRESS/M 
secondary
 
Interface 
Removes assigned secondary IP address to an inter-
face. 
To display an assigned IP address, use the following command. 
Command Mode 
Description 
show ip 
Interface 
Shows an assigned IP address of the interface. 
 
4.3.4 
Static Route and Default Gateway 
It is possible to configure the static route. Static route is a route which user configures 
manually. Packets are transmitted to the destination through static route. Static route in-
cludes destination address, neighbor router to receive packet, the number of routes that 
packets have to go through. 
To configure static route, use the following command. 
Command Mode 
Description 
ip route A.B.C.D SUBNET-MASK
 
{GATEWAY | null} [<1-255>] 
ip route A.B.C.D/M 
{ SUBNET-MASK | null} [<1-
255> | src IP-ADDRESS] 
Configures static route. 
A.B.C.D: destination IP prefix 
GATEWAY: Ip gateway address 
1-255: Distance value 
no ip route A.B.C.D SUBNET-MASK
 
{ GATEWAY | null} [<1-255>] 
no ip route IP-ADDRESS/M
 
{ SUBNET-MASK | null} [<1-255>] 
Global 
Deletes configured static route. 
 
To configure default gateway, use the following command on Global Configuration mode. 
Command Mode 
Description 
ip route default 
{ GATEWAY | null} [<1-255>] 
Configures default gateway. 
GATEWAY: Ip gateway address 
no ip route default 
{ GATEWAY | null} [<1-255>]
Global 
Deletes default gateway.