Siemens S223 User Manual

UMN:CLI                                                                                                                                                              User  Manual 

SURPASS hiD 6615 S223/S323 R1.5 

66                                                                         A50010-Y3-C150-2-7619 

After default server is designated, all requests start from the RADIUS server. If there’s no 
response from default server again, the authentication request is tried for RADIUS server 
designated as next one. 

To configure IP address of RADIUS server and key value, use the following command. 

  {IP-

 | NAME} auth-port <0-

65535> key KEY 

Registers RADIUS server with key value and UDP port 
of radius server. 
IP-ADDRESS: Ip address of radius server 
NAME: host name 
0-65535: UDP port number 
KEY: the value of key 

  {IP-

 | NAME} key KEY 

Configures IP address of RADIUS server and key 
value. 

  {IP-

 | NAME} 

Global 

Deletes a registered RADIUS server. 

 

You can designate up to 5 RADIUS servers as authenticator. 
 

The key is authentication information between the authenticator and RADIUS server. The 
authenticator and RADIUS server must have a same key value, and you can use alpha-
betic characters and numbers for the key value. The space or special character is not al-
lowed. 

You can configure the priority for the radius server that have configured by user. 

  {IP-

 | NAME}  priority  PRI-

 

Global 

Configures the priority of radius server. 
IP-ADDRESS: Ip address of radius server 
NAME: host name 

 

You can change the authentication mode from the port-based to the MAC-based. To 
change the authentication mode, use the following command. 

 

 

Sets the authentication mode to the MAC-based. 

 

 

Global 

Restores the authentication mode to the port-based. 

 

Before setting the authentication mode to the MAC-based, you need to set a MAC filtering 
policy to deny them for all the Ethernet ports. To configure a MAC filtering policy, see Sec-
tion 7.12.1