Siemens 4100 Series User Manual
Router User’s Guide
Monitoring Network Health
Admin User
The Administrator profile controls the requirements for logging into the Web interface and accessing
configuration pages, as well as defining the administrator login name and password.
configuration pages, as well as defining the administrator login name and password.
To configure administrator settings:
1. Select Setup>Admin User from the left navigation pane of the Web interface. This displays the
“Gateway Administrator Setup” window.
2. Specify a user name for the administrator. You may accept the default user name, admin, or enter a
new user name in User Name. The user name is case-sensitive.
3. Enter a password in New Password; then enter the same password in Confirm New Password. The
password field is case-sensitive.
4. Select a login security level from one of the following:
• Require admin login to access entire Web site
Before you can access any screen in the Web interface, you must log in with your network user
name and password. (Security level = High)
name and password. (Security level = High)
• Require admin login to access configuration pages
Before you can access any screen in the Web interface that allows you to make configuration
changes, you must log in with your network user name and password. (Security level = Medium)
changes, you must log in with your network user name and password. (Security level = Medium)
• Do not require admin login
After you log in for the first time, you will not be required to log in again at any screen. (Security
level = Low)
level = Low)
5. Click
Save Settings.
39