Siemens 4200 Series User Manual

Router User’s Guide

 

Configuring Network Settings

 

Use the dynamic DNS advanced option to set up Dynamic DNS. Dynamic DNS translates IP addresses 
into alphanumeric names. For example, an IP address of 333.136.249.80 could be translated into 
siemens.com. To use the DDNS service, you must register for the service. You can register from the 
following web page: 

Once registered, you must set up your DNS data on the Router. Once this is done, users can connect to 
your servers (or DMZ computer) from the Internet using your Domain name. Refer to the section in this 
document titled 

 for more information on DMZs. 

To set up Dynamic DNS on the Router: 

1. Select Setup>Dynamic DNS from the left navigation pane of the Web interface. This displays the 

“Set Up Dynamic DNS” window. 

 

2. Select 

the 

Enable option under Dynamic DNS Client. 

3.  Type the name provided to you by 

 in the Service Username box. 

4. Type 

 password in the Password box. 

5.  Type the domain or host name provided by 

 in the Host Name 1 box. 

6.  Optionally, if you have more than one domain or host name, type it in the Host Name 2 box. 

7. Click 

Apply. The system responds by registering your domain or host name to 

37