Sony 3-855-935-02(1) User Manual
18
To prevent fire or shock hazard, do
not expose the unit to rain or
moisture.
not expose the unit to rain or
moisture.
To avoid electrical shock, do not
open the cabinet. Refer servicing to
qualified personnel only.
open the cabinet. Refer servicing to
qualified personnel only.
When using a LAN cable: For safety, do not
connect to a connector for peripheral device
wiring that might have excessive voltage.
connect to a connector for peripheral device
wiring that might have excessive voltage.
IMPORTANT
The nameplate is located at the left side.
The nameplate is located at the left side.
For the customers in the USA
This equipment has been tested and found
to comply with the limits for a Class A
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential
area is likely to cause harmful interference
in which case the user will be required to
correct the interference at his own expense.
This equipment has been tested and found
to comply with the limits for a Class A
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential
area is likely to cause harmful interference
in which case the user will be required to
correct the interference at his own expense.
You are cautioned that any changes or
modifications not expressly approved in
this manual could void your authority to
operate this equipment.
modifications not expressly approved in
this manual could void your authority to
operate this equipment.
The shielded interface cable recommended
in this manual must be used with this
equipment in order to comply with the
limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules.
in this manual must be used with this
equipment in order to comply with the
limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules.
For the customers in Europe
This product with the CE marking complies
with the EMC Directive (89/336/EEC)
This product with the CE marking complies
with the EMC Directive (89/336/EEC)
issued by the Commission of the European
Community.
Compliance with this directive implies
conformity to the following European
standards:
• EN55103-1: Electromagnetic
Community.
Compliance with this directive implies
conformity to the following European
standards:
• EN55103-1: Electromagnetic
Interference (Emission)
• EN55103-2: Electromagnetic
Susceptibility (Immunity)
This product is intended for use in the
following Electromagnetic Environment
(s):
E1 (residential), E2 (commercial and light
industrial), E3 (urban outdoors) and E4
(controlled EMC environment ex. TV
studio).
following Electromagnetic Environment
(s):
E1 (residential), E2 (commercial and light
industrial), E3 (urban outdoors) and E4
(controlled EMC environment ex. TV
studio).
WARNING
Use an AC power adapter provided with
this equipment as a power supply source.
Any other power sources may result in
hazards such as a fire.
This product has no power switch.
Disconnect device of this equipment is the
mains plug of the AC adapter.
The mains plug on this equipment must be
used to disconnect mains power.Please
ensure that the socket outlet is installed near
the equipment and shall be easily
accessible.In the event of abnormal
operations, disconnect the mains plug.
Use an AC power adapter provided with
this equipment as a power supply source.
Any other power sources may result in
hazards such as a fire.
This product has no power switch.
Disconnect device of this equipment is the
mains plug of the AC adapter.
The mains plug on this equipment must be
used to disconnect mains power.Please
ensure that the socket outlet is installed near
the equipment and shall be easily
accessible.In the event of abnormal
operations, disconnect the mains plug.
For the customers in Netherlands
Voor de klanten in
Nederland
Gooi de batterij niet weg,
maar lever hem in als KCA.
Voor de klanten in
Nederland
Gooi de batterij niet weg,
maar lever hem in als KCA.
WARNING
Caution