Siemens SX763 User Manual
110
Administration
Gigaset SX763 WLAN dsl/ en / A31008-M707-R131-2-7619 / admin_router.fm / 08.12.2006
Sc
hablone 2
005_0
5_02
System Log
The System Log is displayed in the Status – Device menu. It contains important infor-
mation about how the device functions and possible problems. This information can
also be automatically transferred to a system log server.
mation about how the device functions and possible problems. This information can
also be automatically transferred to a system log server.
ì
In the Advanced Settings – Administration menu, select System Log to make the
settings for the log:
settings for the log:
ì
Log level: Specify how much information is to be contained in the system log. You
can choose between four levels:
– Critical: Log file of the most important information for possible device function-
can choose between four levels:
– Critical: Log file of the most important information for possible device function-
ality problems
– Debugging: Complete and detailed information on all device functions
– Warning and Informational are intermediate levels.
ì
System log server
– Activate this function if the device system log is to be automatically transferred
– Activate this function if the device system log is to be automatically transferred
to a system log server in the local network.
– Server address:
Enter the IP address for the system log server.
– Server port:
Enter the port of the system log server that is to be used to transfer the system
log.
log.
ì
Click OK to save and apply the changes.
Please remember:
Setting the log level Debugging can generate enormous load on the system
and thus impair the data throughput of the device.
Setting the log level Debugging can generate enormous load on the system
and thus impair the data throughput of the device.