Siemens SX763 User Manual

 Gigaset SX763 WLAN dsl/ en / A31008-M707-R131-2-7619 / admin_router.fm / 08.12.2006

Sc

hablone 2

005_0

5_02

Shows the public IP address of the device.

u

PPPoE pass-through 
Shows the status of PPPoE pass-through for the DSL or cable connection for estab-
lishing an Internet connection directly between a PC and the network.

u

ADSL Line 
– Status 

The status of the cable connection from your device to your DSL port. 

– Line mode 

The current line mode used by your DSL port. 

– Maximum line rate 

The maximum possible data transfer rate of your DSL port for incoming and out-

going data traffic. 

– Noise margin 

The maximum signal-to-noise ratio of your DSL port for incoming and outgoing 

data traffic. 

– Line attenuation 

The line attenuation of your DSL port for incoming and outgoing data traffic. 

– Output power 

The output power of your DSL port for incoming and outgoing data traffic. 

u

Address Translation (NAT) 
– Status 

Shows the status of the NAT (Network Address Translation) for the Internet con-

nection. 

– NAT table 

Shows the current number of entries in the NAT table. 
Click Empty to delete all the current entries in the NAT table.

ì

Click Refresh to refresh this screen and update the displayed data.

You will find information about the local network settings on the Local Network screen 
in the Status menu.

u

IP address 
Shows the local IP address of the device. 

u

Subnet mask 
Shows the subnet mask used in the local network. 

u

MAC address 
Shows the local MAC address of the device for wired data transfer.

u

DHCP Server 
– Status