Siemens SX763 User Manual

Page of 156
19
First steps
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / device_763.fm / 08.12.2006
Sc
hablone 2
004_
08_2
6
Setting up the Gigaset SX763 WLAN dsl
Front panel
The Gigaset SX763 WLAN dsl can be set up in any suitable location in the home or office. 
You do not need any special wiring. However, you should comply with the following 
guidelines:
u
Operate the Gigaset SX763 WLAN dsl only indoors within a temperature range of 
0 to +40 °C. Do not position the Gigaset SX763 WLAN dsl near sources of heat. Do 
not cover the ventilation slots. High temperatures can damage the device.
u
A mains socket for 220/230 V~ and a connection socket for the splitter or LAN must 
be available in the place where you set up the Gigaset SX763 WLAN dsl.
u
Do not position the device in the immediate vicinity of stereo equipment, TV sets, 
microwave ovens or the like. This may cause interference.
u
Position the Gigaset SX763 WLAN dsl so that it is as near to the centre of your wire-
less network as possible. The general rule is: The higher you place the antennae, the 
better the performance. Make sure that the place where you position the Gigaset 
SX763 WLAN dsl offers optimum reception throughout the house, apartment or 
office.
u
Position the Gigaset SX763 WLAN dsl so that it cannot fall down and damage the 
antennae. Position the Gigaset SX763 WLAN dsl on a non-slip surface. 
u
Do not place the Gigaset SX763 WLAN dsl on any furniture surface that could be 
affected by the heat from the device.