Siemens SX763 User Manual

Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / device_763.fm / 08.12.2006

Sc

hablone 2

004_

08_2

6

You can connect wired or wireless PCs to your Gigaset SX763 WLAN dsl to create a local 
area network (LAN).
First connect just one PC to the Gigaset SX763 WLAN dsl. You can then carry out the 
general configuration. (If you wish to connect more PCs, please turn to page 31.)

Wireless
A wireless connection is made using a wireless network adapter that must be installed 
in your PC. This can be an 802.11g or 802.11b-compatible wireless network adapter. 
Owing to the superior range and the high data throughput, we recommend that you use 
the Gigaset PC Card 108 or the Gigaset USB Adapter 108.
A wireless network is defined by assigning an identical SSID to all the devices. 

ì

You should therefore enter the SSID for the Gigaset SX763 WLAN dsl in your network 
adapter configuration. The default SSID for the Gigaset SX763 WLAN dsl is 
ConnectionPoint. 

If you use a wireless network adapter from the Gigaset range, enter the SSID using the 
Gigaset WLAN Adapter Monitor. 

Note:
If your telephone has the appropriate connector, plug it directly into one of the Phone 
ports on the Gigaset SX763 WLAN dsl.

Note:
You cannot make calls in the event of a power failure. Emergency numbers are also 
not accessible in this case.

Adapter with TAE socket