Siemens SX763 User Manual
46
Security Setup Wizard
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006
Sc
hablone 2
005_0
5_02
SSID
For the wireless network components to be able to communicate with one another, you
must use the same
must use the same
(Service Set Identifier).
The default SSID for the Gigaset SX763 WLAN dsl is ConnectionPoint. For security rea-
sons you should change this SSID and deactivate SSID broadcast.
If this option is enabled, the Gigaset SX763 WLAN dsl will send the SSID in all data trans-
fers and the SSID of the Gigaset SX763 WLAN dsl will be displayed on PCs that have a
wireless network adapter. In this case, unauthorised persons could use the SSID to gain
access to your network.
sons you should change this SSID and deactivate SSID broadcast.
If this option is enabled, the Gigaset SX763 WLAN dsl will send the SSID in all data trans-
fers and the SSID of the Gigaset SX763 WLAN dsl will be displayed on PCs that have a
wireless network adapter. In this case, unauthorised persons could use the SSID to gain
access to your network.
ì
Enter a character string of your choice in the SSID field. The SSID is case sensitive. It
can contain up to 32 characters. Use a combination of letters, digits and special char-
acters.
can contain up to 32 characters. Use a combination of letters, digits and special char-
acters.
ì
Deactivate SSID broadcast and make a note of the SSID. You will need this to con-
nect your PC to the Gigaset SX763 WLAN dsl at a later time.
nect your PC to the Gigaset SX763 WLAN dsl at a later time.
ì
Click Next >.
Note:
The connection to the wireless network adapters will be interrupted until the new
SSID has also been entered.
The connection to the wireless network adapters will be interrupted until the new
SSID has also been entered.