Sony BKP-7933 User Manual

1-10 (E)

BKP-7933

1-7. Setting Up

n
The description in this section assumes that the BKPF-R70 is used as the primary station.

1-7-1. Outline

Calling the Menu Display of the Secondary Station

First, call the menu display of the secondary station that is connected to the S-BUS of the primary station.

Procedure

Call the SETUP MENU of the primary station by
pressing [Ctrl]- [X].
Then, select the menu item “R:CALL SECONDARY
STATION” and press [ENTER].

1-7. Setting Up

SONY ROUTING SYSTEM SETUP MENU BKPF-R70 V1.02T STATION NUMBER 1

MODIFICATION COMMAND

A: DISPLAY CONTROL AREA B: SET SOURCE/DEST TYPE

C: SET DESTINATION NAME D: SET SOURCE NAME

E: SET LEVEL TABLE F: SET ACTIVE UNIT NUMBER

G: UPDATE BACKUP CONTROLLER H: SET GLOBAL PHANTOM

J: NAME STYLE(Type + Num) K: RESET TO DEFAULT TABLE

L: SET PHYSICAL ASSIGNMENT M: SET INHIBIT TABLE

N: SET DESCRIPTION NAME GROUP O: SET TIE LINES

P: CHANGE PASSWORD Q: CHANGE CROSSPOINT

R: CALL SECONDARY STATION

MAINTENANCE COMMAND

------------------ T: SET CLOCK

U: SELECT CONTROL MODE V: SELECT WARNING DISPLAY (ON)

W: SYSTEM STATUS LOG X: DISPLAY S-BUS COMMUNICATION

Y: DISPLAY TABLE DATA Z: SET UNIT DETECTABLE

Ctrl_X:QUIT SETUP MENU

SONY ROUTING SYSTEM SETUP MENU BKP-7933 V1.00 STATION NUMBER 2

MODIFICATION COMMAND

A: SET UNIT LOCATION(CAM-CCU) B: SET UNIT LOCATION(CCU-RCP)

C: SET UNIT LOCATION(MSU)

K: RESET TO DEFAULT TABLE

MAINTENANCE COMMAND

Z: BKP-7933 CONFIGURATION

Ctrl-D RETURN

When the message “CALL STATION NUMBER?”

appears, input the S-BUS ID number of the BKP-7933

using the numeric keys and press [ENTER]. The

display changes to the called BKP-7933 menu display.

m
. If the specified BKP-7933 does not exist on the S-

BUS data link, an error is displayed.

Display: “Station does not exist”

. If the specified BKP-7933 is outside the communi-

cation target, an error is displayed.

Check using the menu item “F:SET ACTIVE UNIT

NUMBER”.

Display: “Disable Station”