Sony BKP-7933 User Manual

1-19 (E)

BKP-7933

SONY ROUTING SYSTEM SETUP MENU BKP-7933 V1.00 STATION NUMBER 2

MODIFICATION COMMAND

A: SET UNIT LOCATION(CAM-CCU) B: SET UNIT LOCATION(CCU-RCP)

C: SET UNIT LOCATION(MSU)

K: RESET TO DEFAULT TABLE

MAINTENANCE COMMAND

Z: BKP-7933 CONFIGURATION

Ctrl-D RETURN

BKP-7933 CONFIGURATION BKP-7933 V1.00 STATION NUMBER 2

S-BUS CONFIGURATION

A: ROUTER PIX1 ASSIGN B: ROUTER WF1 ASSIGN

C: ROUTER PIX2 ASSIGN D: ROUTER WF2 ASSIGN

E: ROUTER PIX3 ASSIGN F: ROUTER WF3 ASSIGN

G: S-BUS TALLY H: BKP-7933 MODE

Ctrl-E RETURN TO MENU

BKP-7933 CONFIGURATION

BKP-7933 V1.00 STATION NUMBER 2

ROUTER PIX3 ASSIGN (FOR RCP Previw switch))

CNU GROUP No SOURCE No DESTINATION No LEVEL No

Master Source 0013 0015 1---

(Camera No.)

2 (13) 0000

2 (14) 0000

2 (15) 0000

2 (16) 0000

2 (17) 0000

2 (18) 0000

3 (19) 0000

3 (20) 0000

3 (21) 0000

3 (22) 0000

3 (23) 0000

3 (24) 0000

F1:F2: F3:PgUp F4:PgDn Ctrl-E RETURN TO MENU

Setting from the S-BUS Primary Station

Select the menu item “Z:BKP-7933 CONFIGURA-
TION” and press [ENTER].

Select either “E:ROUTER PIX3 ASSIGN” or
“F:ROUTER WF3 ASSIGN” using the cursor key and
press [ENTER]. (The illustration shows the display
that selects “E:ROUTER PIX3 ASSIGN”. )

Move the cursor key to the desired position to be

changed and press [ENTER]. (The display enters the

input mode.)

Input the SOURCE No. of the master source and each

camera, DESTINATION No. and LEVEL No. using

the numeric keys and press [ENTER]. (The illustra-

tion shows the display that selects “E:ROUTER PIX3

ASSIGN”. )

m
. Any number in the range of 1 to 1024 can be

selected and set to the SOURCE No. and DESTINA-

TION No. without being consecutive.

. LEVEL No. can be freely set, but it cannot be set for

each camera number.

1-7. Setting Up