Sony BKP-7933 User Manual

1-27 (E)

BKP-7933

Set the menu as follows when you want to change the camera assignment virtually.  When this setting is
executed, the camera assignment can be changed virtually without changing the cable connection be-
tween the cameras and CCUs.  However, the tally numbers and the MSU camera select numbers cannot

be changed.

n
When the SOURCE NAME is set for each camera number, the name can be output to the CNU character
displays (from page 2 to page 11) of the CNU-700 with BKP-7933 installed.

1-7. Setting Up

1.

Select the menu item “A:SET UNIT LOCATION
(CAM-CCU)” and press [ENTER].

2.

 Move the cursor key to the desired position to be
changed and press [ENTER].  (The display enters the
input mode.)

SONY ROUTING SYSTEM SETUP MENU         BKP-7933 V1.00      STATION NUMBER 2

   

                         MODIFICATION COMMAND

 A: SET UNIT LOCATION(CAM-CCU)          B: SET UNIT LOCATION(CCU-RCP)

 C: SET UNIT LOCATION(MSU)

 K: RESET TO DEFAULT TABLE

                         MAINTENANCE COMMAND

 Z: BKP-7933 CONFIGURATION

 Ctrl-D RETURN

SET UNIT LOCATION(CAM-CCU)           BKP-7933  V1.00   STATION NUMBER 2

CAMERA-CCU VIRTUAL MATRIX

 

 SOURCE No    

DESTINATION No         LEVEL No

            0033-0044    

  0033-0044               1  

 

                 

         

                                               Ctrl-E RETURN TO MENU

3.

Input the SOURCE No., DESTINATION No. and

LEVEL No. using the numeric keys and press
[ENTER].

m
. Up to 96 in the range of 1 to 1024 can be selected

and set to the SOURCE No. and the DESTINATION

No., but the numbers must be consecutive.

. Any number in the range of 1 to 8 can be set to the

LEVEL No.  This setting can be assigned to the

respective level and can be mapped.