Sony BKP-7933 User Manual

1-32 (E)

BKP-7933

Set the menu as follows when you want to display the self-diagnostic information on the display.  When
this setting is executed, the status of the self-diagnostics is displayed on the terminal when the self-
diagnostic information of the camera or CCU changes.  The log of the self-diagnostic information can be

checked by selecting “W: SYSTEM STATUS LOG” on the BKPF-R70 menu display.

1.

Select the menu item “Z:BKP-7933 CONFIGURA-
TION” and press [ENTER].

SONY ROUTING SYSTEM SETUP MENU         BKP-7933 V1.00      STATION NUMBER 2

   

                         MODIFICATION COMMAND

 A: SET UNIT LOCATION(CAM-CCU)          B: SET UNIT LOCATION(CCU-RCP)

 C: SET UNIT LOCATION(MSU)

 K: RESET TO DEFAULT TABLE

                         MAINTENANCE COMMAND

 Z: BKP-7933 CONFIGURATION

 Ctrl-D RETURN

BKP-7933 CONFIGURATION                 BKP-7933 V1.00      STATION NUMBER 2

                         S-BUS CONFIGURATION

         A: ROUTER PIX1 ASSIGN         B: ROUTER WF1 ASSIGN

         C: ROUTER PIX2 ASSIGN         D: ROUTER WF2 ASSIGN

         E: ROUTER PIX3 ASSIGN         F: ROUTER WF3 ASSIGN

         G: S-BUS TALLY                H: BKP-7933  MODE

                                                   Ctrl-E RETURN TO MENU

2.

Select the menu item “H: BKP-7933 MODE” and

press [ENTER].

3.

Set the “4 DIAGNOSIS DISPLAY” to the ON posi-

tion using the cursor key and press [ENTER].

1-7. Setting Up

BKP-7933 CONFIGURATION                 BKP-7933  V1.00   STATION NUMBER 2

      1  SBUS TALLY SYSTEM        [    OFF    ]   [    ON     ]

2  RCP PREVIEN SWITCH       [INDEPENDENCE]  [ LINK MSU  ]

3  CAMERA No                [    CNU    ]   [SOURCE NAME] 

4 DIAGNOSIS DISPLAY         [    OFF    ]   [    ON     ]

                                                    Ctrl-E RETURN TO MENU