Sony BKP-7933 User Manual
1-35 (E)
BKP-7933
1-8. Data Backup/Restore
m
. The description in this section assumes that BKPF-R70 is used as the primary station.
. The setup data of the unit is backed up and restored by using the BZR-10 (software for data backup)
. The description in this section assumes that BKPF-R70 is used as the primary station.
. The setup data of the unit is backed up and restored by using the BZR-10 (software for data backup)
supplied with the BKPF-R70.
. In this section, a lower-case letter is used in the sample screens. If you want, you can type with a
capital letter unless otherwise specified. Not type quotation marks (“ ”) but only 1 when the procedure
describes as follows; Type “1”.
The sample screens use roman letters, boldface letters, and symbols according to the follows.
The sample screens use roman letters, boldface letters, and symbols according to the follows.
Sample
Description
C:\>
Message displayed automatically by a program
install c:
Characters to be typed by user
"
Enter key/Return key
\
Space bar (One space is made.)
1-8-1. Installing the BZR-10
BZR-10 operates on the MS-DOS version 6.2 or in the DOS mode of Windows95.
Use the IBM PC/AT compatible personal computer in which the terminal software has been already
installed.
1.
Insert the BZR-10 floppy disk (abbreviated as FD hereafter) in an FD drive of a personal computer.
2.
Select the FD drive (Which is “A” drive in this document) in which the BZR-10 FD is inserted.
C:\>
a:
"
3.
Type as follows. The BZR-10 software is installed to the hard disk.
A:\>
install c:
"
4.
Type as follows. The mode enters the EDIT command.
Type “c:\router>” at the end of PATH. The PATH is added to AUTOEXEC.BAT file.
A:\>
c:
"
C:\ROUTER>
cd
\
\
\
\
\
..
"
C:\>
edit autoexec.bat
"
PATH C:\;C: …
;c:\router
5.
Save the AUTOEXEC.BAT file. Quit the edit command.
6.
Remove the FD from the disk drive.
7.
Use the Ctrl-Alt-Del key combination.
The personal computer restarts.
The personal computer restarts.
1-8. Data Backup/Restore