Siemens S323 User Manual

UMN:CLI                                                                                                                                                              User  Manual 

SURPASS hiD 6615 S223/S323 R1.5 

120                                                                         A50010-Y3-C150-2-7619 

To configure Local OAM, use the following command. 

  {active | 

} PORTS 

Bridge 

Configures the mode of local OAM. 

 

Both request and loopback are possible for local OAM active. However, request or loop-
back is impossible for local OAM passive. 

 

When RX is impossible in local OAM, it is possible to send the information by using TX. 
To enable/disable the function, use the following command. 

 

Sends the information by using TX. 

 

 

Bridge 

Disables to transmit the information by using TX. 

 

 

To enable/disable remote OAM, use the following command. 

 <1-2> 

 PORTS 

Enables remote OAM. 

 <1-2> 

disable PORTS

 

Bridge 

Disables remote OAM. 

 

To configure the mode of remote OAM, use the following command.   

 <1-2> 

{active | passive} PORTS 

Bridge 

Configures the mode of remote OAM.