Siemens S323 User Manual

UMN:CLI                                                                                                                                                              User  Manual 

SURPASS hiD 6615 S223/S323 R1.5 

128                                                                         A50010-Y3-C150-2-7619 

1 sec is the minimum time which can be selected. But the minimum sampling interval 
currently is 30 sec, i.e., all intervals will be round up to a multiple of 30 seconds. 

 

To activate RMON history, use the following command. 

RMON 

Activates RMON history. 

 

Before activating RMON history, check if your configuration is correct. After RMON history 
is activated, you cannot change its configuration. If you need to change configuration, you 
need to delete the RMON history and configure it again. 

 

When you need to change a configuration of RMON history, you should delete an existing 
RMON history. 

To delete RMON history, use the following command. 

 <1-65535> 

RMON 

Deletes RMON history of specified number, enter the 
value for deleting. 

 

To display RMON history, use the following command. 

 

 

 

All 

Shows a configured RMON history. 

 

Always the last values will be displayed but no more than the number of the granted 
buckets. 

 

The following is an example of displaying RMON history. 

SWITCH(config-rmonhistory [5])# show running-config rmon-history 

! 

rmon-history 5 

 owner  test 

 data-source  ifindex.hdlc1 

 interval  60 

 requested-buckets  25 

 active 

! 

SWITCH(config-rmonhistory [5])#