Siemens S323 User Manual

UMN:CLI                                                                                                                                                              User  Manual 

SURPASS hiD 6615 S223/S323 R1.5 

158                                                                         A50010-Y3-C150-2-7619 

To configure max new hosts, use the following command. 

  PORTS MAX-

 

The number of MAC address that can be learned on 
the port for a second. 

  system  PORTS 

Bridge 

The number of MAC address that can be learned on 
the system for a second. 

 

To delete configured max new hosts, use the following command. 

 PORTS 

Deletes the number of MAC address that can be 
learned on the port. 

Bridge 

Deletes the number of MAC address that can be 
learned on the system. 

 

To display configured max new hosts, use the following command. 

Enable 

Global 
Bridge 

Shows the configured Max-new-hosts. 

 

If MAC that already counted disappears before passing 1 second and starts learning 
again, it is not counted. In case the same MAC is detected on the other port also, it is not 
counted again. For example, if MAC that was learned on port 1 is detected on port 2, it is 
supposed that MAC moved to the port 2. So, it is deleted from the port 1 and learned on 
the port 2 but it is not counted. 

 

You can use the port security feature to restrict input to an interface by limiting and identi-
fying MAC addresses of the PCs that are allowed to access the port. When you assign 
secure MAC addresses to a secure port, the port does not forward packets with source 
addresses outside the group of defined addresses. If you limit the number of secure MAC 
addresses to one and assign a single secure MAC address, the PC attached to that port 
is assured the full bandwidth of the port. 

Step 1 
Enable port security on the port. 

 PORTS Bridge 

Enables port security on the port. 

PORT: selects port number