Siemens S323 User Manual

UMN:CLI                                                                                                                                                              User  Manual 

SURPASS hiD 6615 S223/S323 R1.5 

168                                                                         A50010-Y3-C150-2-7619 

You can configure the switch to perform additional checks on the destination MAC ad-
dress, the sender and target IP address and the source MAC address. 

  {src-

 | dst-mac | ip} 

Inspects specific check on incoming ARP packets. 
src-mac: checks the source MAC address. Packets 
with different MAC addresses are classified as invalid 
are dropped. 
dst-mac: checks the destination MAC address. Packets 
with different MAC addresses are classified as invalid 
are dropped. 
ip: checks the unexpected IP address. 

  NAME 

 VLAN 

Applies ARP ACL to the VLAN. 
NAME: ARP ACL name. It is created with the arp ac-

 NAME command. 

 

 

Global 

Configures a connection between switches as trusted. 
PORTS: trusted port number. 

 

To remove the specific ARP Inspection configuration, use the following commands 

 

{src-mac | dst-mac | ip} 

 NAME 

 VLAN 

 

 

Global Removes 

specific 

ARP 

inspection configuration. 

 

To display checking and statistics, use the following command. 

  [vlan 

] 

 

[vlan VLAN] 

 

[port PORTS] 

Enable 

Global 
Bridge 

Displays the information of ARP inspection. 

 

To clear ARP inspection mapping counter and statistics, use the following command. 

 

[vlan VLAN] 

Global 
Bridge 

Clears ARP inspection statistics.