Siemens S323 User Manual
UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
224 A50010-Y3-C150-2-7619
To enable/disable self loop detection, use the following command.
Command Mode
Description
self-loop-detect
{enable | dis-
able
}
Bridge Enables/disables
self loop detection function.
To display a configuration for BPDU, use the following command.
Command Mode
Description
show self-loop-detect
Shows status of self loop detection and a port where
loop is happed.
loop is happed.
show self-loop-detect
{all |
PORTS
}
Enable
Global
Bridge
Bridge
Shows self loop detection status on specified ports:
all: all the ports
PORTS: selected port
all: all the ports
PORTS: selected port
8.3.9.8
Displaying BPDU Configuration
To display the configuration for BPDU, use the following command.
Command Mode
Description
show stp mst
MSTID-RANGE {all
| PORTS} [detail]
show stp mst
MSTID-RANGE all
[detail]
show stp mst
MSTID-RANGE
PORTS
[detail]
Shows a configuration for BPDU for STP, RSTP and
MSTP.
MSTP.
show stp pvst VLAN-RANGE
[all | PORTS] [detail]
Enable
Global
Bridge
Bridge
Shows a configuration for BPDU for PVSTP and
PVRSTP.
PVRSTP.