Siemens S323 User Manual

UMN:CLI                                                                                                                                                              User  Manual 

SURPASS hiD 6615 S223/S323 R1.5 

240                                                                         A50010-Y3-C150-2-7619 

The DHCP pool is a group of IP addresses that will be assigned to DHCP clients by 
DHCP server. You can create various DHCP pools that can be configured with a different 
network, default gateway and range of IP addresses. This allows the network administra-
tors to effectively handle multiple DHCP environments. 

To create a DHCP pool, use the following command. 

 POOL 

Creates a DHCP pool and opens DHCP Pool Configu-

 mode. 

 POOL 

Global 

Deletes a created DHCP pool. 

 

The following is an example of creating the DHCP pool as sample. 

SWITCH(config)# service dhcp 

SWITCH(config)# ip dhcp pool sample 

SWITCH(config-dhcp[sample])# 

 

To specify a subnet of the DHCP pool, use the following command. 

 A.B.C.D/M 

Specifies a subnet of the DHCP pool. 
A.B.C.D/M: network address 

 A.B.C.D/M 

DHCP Pool

Deletes a specified subnet. 

 

The following is an example of specifying the subnet as 100.1.1.0/24. 

SWITCH(config)# service dhcp 

SWITCH(config)# ip dhcp pool sample 

SWITCH(config-dhcp[sample])# network 100.1.1.0/24 

SWITCH(config-dhcp[sample])# 

 

You can also specify several subnets in a single DHCP pool. 

 

To specify a range of IP addresses that will be assigned to DHCP clients, use the follow-
ing command. 

 A.B.C.D A.B.C.D 

Specifies a range of IP addresses. 
A.B.C.D: start/end IP address 

 A.B.C.D A.B.C.D 

DHCP Pool

Deletes a specified range of IP addresses.