Siemens S323 User Manual

UMN:CLI                                                                                                                                                              User  Manual 

SURPASS hiD 6615 S223/S323 R1.5 

284                                                                         A50010-Y3-C150-2-7619 

To clear IGMP interface entries, use the following command. 

  INTER-

 

Clears IGMP interface entries on an interface. 

  {* | A.B.C.D 

[INTERFACE]} 

Enable 

Deletes IGMP group cache entries. 
*: all IGMP group 
A.B.C.D: IGMP group address 

 

To enable debugging of all IGMP or a specific feature of IGMP, use the following com-
mand. 

  {all | decode | en-

 | events | fsm | tib} 

Enables debugging of IGMP. 
all: debug all IGMP 
decode: debug IGMP decoding 
encode: debug IGMP encoding 
events: debug IGMP events 
fsm: debug IGMP Finite State Machine (FSM) 
tib: debug IGMP Tree Information Base (TIB) 

  {all | decode | 

 | events | fsm | tib} 

Enable 

Disables the IGMP debugging configuration. 

 

To change the Querier Robustness Variable value on an interface, use the following 
command. 

 <2-

7> 

Configures the querier robustness variable value on an 
interface. 

Interface 

Returns to the default value. (default: 2) 

 

IGMP v2 consists of three message type, query, membership report and leave report. 
This chapter describes how to configure these IGMP v2 features. 

 

If there is no group member on a network segment and you want to transmit multicast 
packet to that network segment, you can configure to pull multicast traffic down to a net-
work segment using the ip igmp static-group command. With this command, the switch 
does not accept the packets, but forwards them. The outgoing interface appears in the