Siemens S323 User Manual

User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 

A50010-Y3-C150-2-7619                                                                         291 

To disable IGMP snooping fast-leave, use the following command. 

Deletes the fast-leave. 

 VLAN-

 immediate-leave 

Global 

Deletes the fast-leave on a VLAN interface. 

 

To display IGMP snooping Immediate Leave configuration, use the following command. 

  [vlan 

] 

Enable 

Global 
Bridge 

Shows that the IGMP snooping Immediate leave is 
enabled. 

 

You can use the hiD 6615 S223/S323 as IGMP querier without multicast router, because 
IGMP query daemon has been installed in the hiD 6615 S223/S323. Legacy equipments 
used IGMP Querier of PIM but not developed Querier for IGMP Snooping. Because of 
this, to operate Querier on IGMP Snooping, IP Address was mandatory and Specific 
Query was operated by IGMP Querier. 

The hiD 6615 S223/S323 implemented IGMP Snooping Querier and it operates differently 
with IGMP Query. IGMP Snooping Querier can send General Query from Snooping 
Switch and it should be distinguished with Specific Query. IGMP Snooping Querier also 
uses Source IP Address 0.0.0.0, if there is no IP Address on Switch. 
 

 Querier 

To enable the IGMP Snooping querier, use the following command. 

 A.B.C.D 

Enables the IGMP snooping querier on the system. 
A.B.C.D: Source address for IGMP v2 snooping querier

  VLANS 

 A.B.C.D 

Global 

Enables the IGMP snooping querier on a VLAN inter-
face. 
VLANS: VLAN ID 

 

To disable IGMP querier, use the following command. 

Disables the IGMP snooping querier. 

 VLAN-

 querier address 

Global 

Disables the IGMP snooping querier on a VLAN inter-
face.