Siemens S323 User Manual

UMN:CLI                                                                                                                                                              User  Manual 

SURPASS hiD 6615 S223/S323 R1.5 

294                                                                         A50010-Y3-C150-2-7619 

When IGMP report suppression is enabled, the switch forwards only one IGMP report per 
multicast router query. When report suppression is disabled, all IGMP reports are for-
warded to the multicast routers. 

Configures the IGMP report suppression on the sys-
tem. 

  VLANS 

 

Global 

Configures the IGMP report suppression on a VLAN 
interface. 

 

IGMP report suppression is supported only when the multicast query has IGMP v1 and 
IGMP v2 reports. This feature is not supported when the query includes IGMP v3 reports. 

To disable IGMP snooping report suppression, use the following command. 

Deletes the IGMP report suppression on the system. 

 

 report-suppression 

Global 

Deletes the IGMP report suppression on a VLAN inter-
face. 

 

To display the IGMP Report Suppression configuration, use the following command. 

  [vlan 

] 

Enable 

Global 
Bridge 

Shows that the IGMP report suppression is enabled 

 

You can designate, to which port, the multicast router is connected. If you designate mul-
ticast router is connected to where, it is possible to transmit multicast packet or message 
only to that port. 

To designate the port connected to multicast router, use the following command.   

 

{PORTS | cpu} 

Designates the port where multicast router is con-
nected to on the system. 
PORTS: logical port number ID to use 
cpu: identifies the CPU port to use. 

  VLANS 

 {PORTS | cpu} 

Global 

Designates the port where multicast router is con-
nected to on a VLAN interface.