Siemens S323 User Manual

User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 

A50010-Y3-C150-2-7619                                                                         337 

To configure an authentication key which is based on MD5 encoding, use the following 
command. 

 <1-

255> md5 KEY [active] 

 <1-

255> md5 [active] 

 A.B.C.D message-digest-

 <1-255> md5 [active] 

 A.B.C.D message-digest-

 <1-255> md5 LINE [active] 

 A.B.C.D message-digest-

 <1-255> md5 KEY [active] 

Interface 

Configures the authentication which is based on md5 
type. 
1-255: key ID 
KEY: maximum 16 alphanumeric characters 

 

To delete a configured authentication key, use the following command. 

 

 

 

 {first | second} 

  A.B.C.D  authentica-

 KEY 

  A.B.C.D  authentica-

 KEY {first | second} 

 

<1-255> 

  A.B.C.D  message-

 <1-255> 

Interface 

Deletes a configured authentication key. 

 

OSPF protocol assigns suitable cost according to the bandwidth on the each interface to 
find the shortest route. Cost is used for packet routing, and routers are using the Cost to 
communicate. 

To configure an interface cost for OSPF, use the following command. 

 <1-65535> 

 A.B.C.D cost <1-65535> 

Interface 

Configures an interface cost for OSPF.