Siemens S323 User Manual

User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 

A50010-Y3-C150-2-7619                                                                         343 

The default cost of Area is configured only in ABR. ABR function is for delivering the 
summary default route to stub area or NSSA, in that cases the default cost of area must 
be required. However, ABR which does not have stub area or NSSA can not use the fol-
lowing command. 

To configure a default cost of Area, use the following command. 

 <0-4294967295> default-

 <1-16777215> 

Router 

Configures a default cost of Area. 

 

To delete a configured default cost of Area, use the following command. 

 <0-4294967295> default-

 <1-16777215> 

Router 

Deletes a configured default cost of Area. 

 

This command is only for ABR which is delivering summary default route to stub or NSSA. 

 

ABR transmits routing information between Areas. In case of not to transmit router infor-
mation to other area, the hiD 6615 S323 can configure it as a blocking. 

First of all, use the access-list or prefix-list command to assign LIST-NAME. And use 
the following command to block the routing information on LIST-NAME. This configuration 
only available in case of OSPF router is ABR. 

To block routing information on LIST-NAME, use the following command. 

 <0-4294967295> filter-list 

 LIST-NAME {in | out}  

 <0-4294967295> filter-list 

 LIST-NAME {in | out} 

Router 

Blocks routing information on LIST-NAME. 

 

To delete configured blocking information, use the following command. 

 <0-4294967295> filter-

 access LIST-NAME {in | out} 

 <0-4294967295> filter-

 prefix LIST-NAME {in | out} 

Router 

Deletes configured blocking information. 

 

This command is only available for ABR.