Siemens S323 User Manual

User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 

A50010-Y3-C150-2-7619                                                                         355 

The following example shows how to configure the distance with more than 2 options: 

•

 

 external <1-255> inter-area <1-255> 

•

 

 inter-area <1-255> intra-area <1-255> 

 

To make it as a default, use the following command. 

Router 

Restores it as the default. 

 

OSPF regards routing information of specific host as stub link information. Routing infor-
mation can be assigned to each host which is connected with one router. 

To configure the routing information to each host, use the following command. 

 A.B.C.D area A.B.C.D 

 A.B.C.D area A.B.C.D cost <0-65535> 

Router 

Configures the routing information to 
each host. 

 

 

 A.B.C.D area <1-4294967295> 

  A.B.C.D  area <1-4294967295> cost <0-

65535> 

Router 

Configures the routing information to 
each host. 

 

The passive interface which is configured by OSPF network operate as stub area. There-
fore passive interface can not exchange the OSPF routing information. 

To configure the passive interface, use the following command. 

 INTERFACE 

[A.B.C.D] 

Router 

Configures the passive interface. 

 

To release the configured as passive interface, use the following command. 

 INTERFACE 

[A.B.C.D] 

Router 

Releases the configured as passive interface.