Siemens S323 User Manual

UMN:CLI                                                                                                                                                              User  Manual 

SURPASS hiD 6615 S223/S323 R1.5 

360                                                                         A50010-Y3-C150-2-7619 

The hiD 6615 S323 can configures maximum number of LSA to process. LSA is classified 
as internal route LSA and external route LSA, maximum number of LSA can configure on 
each class. 

And also, If process of LSA is over the configured number, you can configure it to stop the 
process or send the caution message. When the outer route of LSA is overflowed the as-
signed value, you can configure it to restart OSPF after the waiting time. If the waiting 
time is 0, OSPF keep the process before the administrator reboots the system. 

To assign the maximum number of LSA to process in OSPF, use the following command. 

 

<1-4294967294> [hard | soft] 

Assigns the number of LSA for internal route. 

 

<0-2147483647> <0-65535> 

Router 

Assigns the number of LSA for external route. 

 

When there is an overflow, hard configuration will stop the process, and soft configura-
tion will send a caution message. 

To release the configuration, use the following command. 

Releases the configuration for OSPF internal route. 

 

[<0-2147483647>] 

 

<0-2147483647> [<0-65535>] 

Router 

Releases the configuration for OSPF external route.