Siemens S323 User Manual

User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 

A50010-Y3-C150-2-7619                                                                         37 

 

Shows available commands of the current mode. 

All 

Shows available commands of the current mode with 
tree structure. 

 

The following is an example of displaying list of available commands of Privileged EXEC 
Enable

 mode. 

SWITCH# show list  

  clear  arp 

  clear  arp  IFNAME 

  clear ip bgp * 

  clear ip bgp * in 

  clear ip bgp * in prefix-filter 

  clear ip bgp * ipv4 (unicast|multicast) in 

  clear ip bgp * ipv4 (unicast|multicast) in prefix-filter 

  clear ip bgp * ipv4 (unicast|multicast) out 

  clear ip bgp * ipv4 (unicast|multicast) soft 

  clear ip bgp * ipv4 (unicast|multicast) soft in 

  clear ip bgp * ipv4 (unicast|multicast) soft out 

-- more – 

 

Press the <ENTER> key to skip to the next list. 
 

In case of the hiD 6615 S223/S323 installed command shell, you can find out commands 
starting with specific alphabet. Input the first letter and question mark without space. The 
following is an example of finding out the commands starting “s” in Privileged EXEC En-
able

 mode of hiD 6615 S223/S323. 

SWITCH# s ? 

  show  Show  running  system  information 

  ssh   Configure  secure  shell 

SWITCH# s 

 

Also, it is possible to view variables you should input following after commands. After in-
putting the command you need, make one space and input question mark. The following 
is an example of viewing variables after the command, write. Please note that you must 
make one space after inputting. 

SWITCH# write ? 

  memory    Write  to  NV  memory 

  terminal  Write  to  terminal 

SWITCH# write 

 

In case of installed command shell, you do not have to enter repeated command again. 
When you need to call command history, use this arrow key <↑>. When you press the ar-
row key, the latest command you used will be displayed one by one. 

The following is an example of calling command history after using several commands.