Siemens S323 User Manual

UMN:CLI User Manual

SURPASS hiD 6615 S223/S323 R1.5

374 A50010-Y3-C150-2-7619

##############################################################################

############################################################

13661792 bytes download OK.

SWITCH# show flash

Flash Information(Bytes)

Area

total

used

free

--------------------------------------------------------------

OS1(default)(running)

16777216

13661822

3115394

3.18 #1009

OS2

16777216

13661428

3115788

3.12 #1008

CONFIG

4194304

663552

3530752

--------------------------------------------------------------

Total

37748736

27986802

9761934

SWITCH# reload

Do you want to save the system configuration? [y/n]y

Do you want to reload the system? [y/n]y

Broadcast message from admin (ttyp0) (Fri Aug 18 15:15:41 2006 +0000):

The system is going down for reboot NOW!

11.2

Boot Mode Upgrade

In case that you cannot upgrade the system software with the general upgrade procedure,
you can upgrade it with the boot mode upgrade procedure. Before the boot mode up-
grade, please keep in mind the following restrictions.

•

A terminal must be connected to the system via the console interface. To open the

boot mode, you should press <S> key when the boot logo is shown up.

•

The boot mode upgrade supports TFTP only. You must set up TFTP server before

upgrading the system software in the boot mode.

•

In the boot mode, the only interface you can use is MGMT interface. So the system

must be connected to the network via the MGMT interface.

•

All you configures in the boot mode is limited to the boot mode only!

To upgrade the system software in the boot mode, perform the following step-by-step in-
struction.

Step 1

To open the boot mode, press <S> key when the boot logo is shown up.

************************************************************

* Boot Loader Version 4.76

* Siemens AG

************************************************************

Press 's' key to go to Boot Mode: 0

Boot>