Siemens S323 User Manual

User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 

A50010-Y3-C150-2-7619                                                                         67 

After configuring 802.1x authentication mode, you should select the authentication port. 

 PORTS 

Designates 802.1x authentication port. 

 PORTS 

Global 

Disables 802.1x authentication port. 

 

The hiD 6615 S223/S323 can allow the users to request the access regardless of the au-
thentication from RADIUS server. For example, it is possible to configure not to be au-
thenticated from the server even though a client is authenticated from the server. 

To manage the approval for the designated port, use the following command. 

  {auto | force-

 | force-unauthorized} 

 

Configures the way of authorization to control port 
whether it has the RADIUS authentication or not.   

 PORTS 

Global 

Deletes the configuration of the way of authorization to 
control port. 

 

  auto: Follows the authentication of RADIUS server.   

  force-authorized: Gives the authorization to a client even though RADIUS server 

didn’t approve it.   

  force-unauthorized: Don’t give the authorization to a client even though RADIUS 

server authenticates it.   

 

In hiD 6615 S223/S323, it is possible to specify how long the device waits for a client to 
send back a response/identity packet after the device has sent a request/identity packet. 
If the client does not send back a response/identity packet during this time, the device re-
transmits the request/identity packet. 

To configure the number of seconds that the switch waits for a response to a re-
quest/identity packet, use the following command. 

 <1-

65535> PORTS 

Sets reattempt interval for requesting request/identity 
packet. 
1-65535: retransmit interval (default: 30) 

 

 

Global 

Disables the interval for requesting identity.