Siemens S323 User Manual
UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
70 A50010-Y3-C150-2-7619
the following command.
Command Mode
Description
dot1x reauthenticate PORTS
Global
Implement re-authentication regardless of the config-
ured time interval.
ured time interval.
4.5.3 Initializing
Authentication
Status
The user can initialize the entire configuration on the port. Once the port is initialized, the
supplicants accessing to the port should be re-authenticated.
supplicants accessing to the port should be re-authenticated.
Command Mode
Description
dot1x initialize
PORTS
Global
Initializes the authentication status on the port.
4.5.4 Applying
Default
Value
To apply the default value to the system, use the following command.
Command Mode
Description
dot1x default
PORTS
Global
Applies the default value.
4.5.5 Displaying
802.1x Configuration
To display 802.1x configuration, use the following command.
Command Mode
Description
show dot1x
[PORTS]
Enable
Global
Shows 802.1x configuration.
4.5.6 802.1x
User
Authentication Statistic
To display the statistics about the process of 802.1x user authentication, use the following
command.
command.
Command Mode
Description
show dot1x statistics
PORTS Global
Shows the statistics of 802.1x user authentication on
the port.
the port.
To reset statistics by deleting the statistics of 802.1x user authentication, use the following
command.
command.
Command Mode
Description
dot1x clear statistics
PORTS Global
Makes reset state by deleting the statistics of 802.1x
on the port.
on the port.