Manualsbrain.com
  1. Manuals
  2. Brands
  3. Siemens
  4. S323
  5. User Manual

Siemens S323 User Manual

Download
Page of 381
UMN:CLI                                                                                                                                                              User  Manual 
SURPASS hiD 6615 S223/S323 R1.5 
80                                                                         A50010-Y3-C150-2-7619 
5.2.8 Port 
Status 
To display a port status, use the following command. 
Command Mode 
Description 
show port
 PORTS 
Shows configured state of port, enter the port number. 
show port
 description [PORTS] 
Shows port specific description (max. number of char-
acters is 100), enter the port number. 
show port module-info 
[PORTS] 
Enable 
Global 
Bridge 
Shows port module information. 
 
The following is an example of displaying port information for port 1 to 12. 
SWITCH# show port 1-12 
------------------------------------------------------------------------ 
NO TYPE PVID 
STATUS 
MODE 
FLOWCTRL INSTALLED 
                          (ADMIN/OPER)                (ADMIN/OPER) 
------------------------------------------------------------------------ 
1:    Ethernet      1     Up/Down   
Force/Full/0    Off/  Off       Y 
2:    Ethernet      1     Up/Down  
Force/Full/0    Off/  Off       Y 
3:    Ethernet      1     Up/Down   
Auto/Full/0     Off/  Off       Y 
4:    Ethernet      1     Up/Down   
Auto/Full/0     Off/  Off       Y 
5:    Ethernet      1     Up/Down   
Auto/Full/0     Off/  Off       Y 
6:    Ethernet      1     Up/Down   
Auto/Full/0     Off/  Off       Y 
7:    Ethernet      1     Up/Down   
Auto/Full/0     Off/  Off       Y 
8:    Ethernet      1     Up/Down  
Auto/Full/0     Off/  Off       Y 
9:    Ethernet      1     Up/Down 
Auto/Full/0     Off/  Off       Y 
10:   Ethernet      1     Up/Down   
Auto/Full/0     Off/  Off       Y 
11:   Ethernet      1     Up/Down  
Auto/Full/0     Off/  Off       Y 
12:   Ethernet      1     Up/Down   
Auto/Full/0     Off/  Off       Y 
SWITCH# 
 
5.2.9 
Initializing Port Statistics 
To clear all recorded statistics of port and initiate, use the following command. It is possi-
ble to initiate statistics of port and select specific port. 
Command Mode 
Function 
clear port statistics 
{PORT  ㅣall}
Global 
Initializes port statistics. It is possible to select several
ports. 
 
5.3 Port 
Mirroring 
Port mirroring is the function of monitoring a designated port. Here, one port to monitor is 
called monitor port and a port to be monitored is called mirrored port. Traffic transmitted 
from mirrored port is sent to monitor port so that user can monitor network traffic. 
The following is a network structure to analyze the traffic by port mirroring It analyzes traf-
fic on the switch and network status by configuring Mirrored port and Monitor port con-
necting the computer, that the watch program is installed, to the port configured as Moni-
tor port.