SonicWALL 4000 User Manual
SonicWALL SSL VPN 4000 Getting Started Guide Page 19
Scenario B: Connecting the SonicWALL SSL VPN 4000
To connect the SonicWALL SSL VPN 4000 using Scenario B, perform the following
steps:
steps:
1.
Connect one end of an Ethernet cable to an unused port on your DMZ, either directly
to the OPT or X2 on your existing SonicWALL UTM appliance or to a hub or switch
on your DMZ.
to the OPT or X2 on your existing SonicWALL UTM appliance or to a hub or switch
on your DMZ.
Scenario B: SSL VPN on an Existing DMZ
2.
Connect the other end of the Ethernet cable to the X0 port on the front of your
SonicWALL SSL VPN 4000. The X0 Port LED lights up green indicating an active
connection.
SonicWALL SSL VPN 4000. The X0 Port LED lights up green indicating an active
connection.
Scenario C: Configuring Your Network Interface
Configure your SonicWALL SSL VPN 4000 to connect to your SonicWALL UTM
appliance under network configurations given in Scenario C.
appliance under network configurations given in Scenario C.
On the SonicWALL SSL VPN 4000:
1.
Select the Network > Interfaces page.
2.
Click the Configure button for the X0 port.
3.
Enter an unused IP address in your LAN in the IP Address field.
SonicWALL UTM PRO 5060
Existing DMZ
X1
X0
X2
SonicWALL SSL-VPN 4000
X0
Router
Switch/
Hub
Remote Users
Network Nodes
Network Node
Internet Zone
LAN
Switch/
Hub