SonicWALL 4000 User Manual

         

SonicWALL SSL VPN 4000 Getting Started Guide       Page 5

1.

Plug the power cord into the SonicWALL SSL VPN 4000 and into an appropriate 
power outlet. 

2.

Turn on the power switch on the rear of the appliance next to the power cord. 

The Power LED 

 on the front panel lights up green when you turn on the 

SonicWALL SSL VPN 4000. The Test 

 LED lights up yellow and may blink for up 

to a minute while the appliance performs a series of diagnostic tests. When the Test 
light is no longer lit, the SonicWALL SSL VPN 4000 is ready for configuration. 

If the Test or Alarm LEDs remain lit or if the Test LED blinks red after the 
SonicWALL SSL VPN 4000 has booted, restart the SonicWALL SSL VPN 4000. For 
more troubleshooting information, refer to the SonicWALL SSL VPN Administrator’s 
Guide.

2

Console Port: Provides

X1 - X5: 10/100 Ethernet

X0: Default management port.
Provides connectivity between
the SSL VPN and your gateway.

access to the command
line interface. 
(for future use)