SonicWALL 4000 User Manual
Page 60
Mounting Guidelines
The SonicWALL SSL VPN 4000 is designed to be mounted in a standard 19-inch rack
mount cabinet. The following conditions are required for proper installation:
mount cabinet. The following conditions are required for proper installation:
•
Use the mounting hardware recommended by the rack manufacturer and ensure
that the rack is adequate for the application. SonicWALL includes a rack
mounting kit with the SonicWALL SSL VPN appliance that is compatible with
most computer equipment racks.
that the rack is adequate for the application. SonicWALL includes a rack
mounting kit with the SonicWALL SSL VPN appliance that is compatible with
most computer equipment racks.
•
Four mounting screws, compatible with the rack design, must be used and hand
tightened to ensure secure installation. Select a mounting location where all four
mounting holes line up with those of the mounting bars of the 19-inch rack mount
cabinet.
tightened to ensure secure installation. Select a mounting location where all four
mounting holes line up with those of the mounting bars of the 19-inch rack mount
cabinet.
•
Mount in a location away from direct sunlight and sources of heat. A maximum
ambient temperature of 104º F (40º C) is recommended.
ambient temperature of 104º F (40º C) is recommended.
•
Route cables away from power lines, fluorescent lighting fixtures, and sources of
noise such as radios, transmitters, and broadband amplifiers
noise such as radios, transmitters, and broadband amplifiers
•
Ensure that no water or excessive moisture can enter the unit.
•
Allow unrestricted airflow around the unit and through the vents on the side of
the unit. A minimum of 1 inch (25.44mm) clearance is recommended.
the unit. A minimum of 1 inch (25.44mm) clearance is recommended.
•
Mount the SonicWALL appliances evenly in the rack in order to prevent a
hazardous condition caused by uneven mechanical loading.
hazardous condition caused by uneven mechanical loading.
•
Consideration must be given to the connection of the equipment to the supply
circuit and the effect of overloading the circuits has minimal impact on
overcurrent protection and supply wiring. Appropriate consideration of
equipment nameplate ratings must be used when addressing this concern.
circuit and the effect of overloading the circuits has minimal impact on
overcurrent protection and supply wiring. Appropriate consideration of
equipment nameplate ratings must be used when addressing this concern.
•
Reliable grounding of rack-mounted equipment must be maintained. Particular
attention must be given to power supply connections other than direct
connections to the branch circuits such as using power strips.
attention must be given to power supply connections other than direct
connections to the branch circuits such as using power strips.