Sierra Wireless EV-DO User Manual
Global Positioning System (GPS)
Rev 3.0B Feb.08
95
cally be used. S53, in AceManager, is part of the Misc
group.
group.
Figure 9-26: AceManager : Misc - S53 Port
b.
Set the Local Report Type, *PPLATSR, to your
preferred NMEA sentence format.
preferred NMEA sentence format.
Figure 9-27: AceManager : PinPoint - *PPLATSR
•
E0 ‐ NMEA GGA and VTG sentences.
•
E1 ‐ NMEA GGA, RMC, and VTG sentences.
c.
Set Local Reporting Time Interval, using *PPLATS, to
the number of seconds you want as an interval
between reports being sent.
the number of seconds you want as an interval
between reports being sent.
Figure 9-28: AceManager : PinPoint - *PPLATS
Streaming Messages (Local)
The PinPoint‐E can be configured to send standard NMEA
messages (sentences) in ASCII over the serial port without a
PPP connection to the local computer.
messages (sentences) in ASCII over the serial port without a
PPP connection to the local computer.
Send the command ATGPS1 to the serial port to begin the
NMEA stream. The example below shows the stream in
HyperTerminal connecting directly to a PinPoint‐E via the
comport. To stop the stream, use the command ATGPS0 (this
can be entered even while data is streaming).
NMEA stream. The example below shows the stream in
HyperTerminal connecting directly to a PinPoint‐E via the
comport. To stop the stream, use the command ATGPS0 (this
can be entered even while data is streaming).