Sierra Wireless EV-DO User Manual
Configuration Commands
Rev 3.0B Feb.08
118
+GSN
ESN (Electronic Serial Number) of the internal hardware
module.
module.
Common
The groups under the heading Common encompass those
commands that are common to most Sierra Wireless AirLink
modems.
commands that are common to most Sierra Wireless AirLink
modems.
Misc (Miscellaneous)
The commands of the “Misc” group are a variety of commands
that don’t directly fit in other categories.
that don’t directly fit in other categories.
Figure 1-5: AceManager : Misc
+++
Note: +++ is not proceeded by
AT nor does it require a carriage
return (enter). There must be an
idle time (set by S50) on the
serial port before and after this
command.
AT nor does it require a carriage
return (enter). There must be an
idle time (set by S50) on the
serial port before and after this
command.
AT Escape sequence. If the PinPoint‐E is in a data mode (any
mode other than PassThru), this command causes the modem
to re‐enter AT command mode. The “+” is ASCII 0x2B.
mode other than PassThru), this command causes the modem
to re‐enter AT command mode. The “+” is ASCII 0x2B.
+++ is
not available in AceManager.
Tip: DAE=1 disables the +++ command.