Sierra Wireless EV-DO User Manual
Configuration Commands
Rev 3.0B Feb.08
154
*PPTSV=n
Timer for Stationary Vehicles. Time interval in minutes that the
PinPoint‐E will send in reports when it is stationary.
PinPoint‐E will send in reports when it is stationary.
•
n=0 : Disabled
•
n=1‐255 minutes
For example, if *PPTIME=10, the PinPoint‐E will send in
reports at least every 10 seconds while it is moving; however,
once it stops moving, it will slow the reports down to this
*PPTSV value.
reports at least every 10 seconds while it is moving; however,
once it stops moving, it will slow the reports down to this
*PPTSV value.
Note: In order for the PPTSV (Stationary Vehicle timer) to take effect,
the PPTIME value must be set to a value greater than 0 and less than
the PPTSV value. The PPTSV timer checks for vehicle movement at
the PPTIME interval, so if PPTIME is disabled, then PPTSV will also
be disabled.
the PPTIME value must be set to a value greater than 0 and less than
the PPTSV value. The PPTSV timer checks for vehicle movement at
the PPTIME interval, so if PPTIME is disabled, then PPTSV will also
be disabled.
*UDPRGPS=n
Set or query GPS stamping of UDP Reliable packets. When set,
data received on the host serial port will be encapsulated with
the GPS date and time.
data received on the host serial port will be encapsulated with
the GPS date and time.
•
n=0 : Disabled (default)
•
n=1 : Enabled
1x/EV-DO
This group includes commands specific to 1x and EV‐DO. If
you are not connecting to a modem which uses EV‐DO or 1x,
you will not see this group in the menu.
you are not connecting to a modem which uses EV‐DO or 1x,
you will not see this group in the menu.
Figure 1-19: AceManager : 1x/EV-DO