Sun Microsystems T3 User Manual
Chapter 4
Configuration Examples
35
The following three parameters must be set on the master controller unit, as follows:
■
mp_support = rw
or mpxio
■
cache mode = auto
■
cache mirroring = auto
Note –
For information on setting these parameters, refer to the Sun StorEdge T3 and
T3+ Array Administrator’s Guide
Host-based multipathing software is required for this configuration.
FIGURE 4-6
Single Host With Two Hubs and Four Controller Units Configured as Two
Partner Groups
Partner Groups
Interconnect
cables
cables
Application host
Ethernet
port
port
Management host
FC-AL
FC-AL
Hub
Hub
LAN
HBA
HBA
Ethernet
Master
Alternate
master
controller
unit
master
controller
unit
controller
unit
unit