Enterasys Networks 1H582-xx User Manual

The “no” form of this command clears redistribution parameters:

no redistribute {connected | rip | static}

Router configuration: Matrix>Router(config-router)#

If metric value is not specified, 0 will be applied.

If type value is not specified, type 2 (external route) will be applied.

If subnets is not specified, only non-subnetted routes will be redistributed.

connected 

Specifies that non-OSPF information discovered via 
directly connected interfaces will be redistributed. These 
are routes not specified in the OSPF network command as 
described in 

Specifies that RIP routing information will be redistributed 
in OSPF. 

Specifies that non-OSPF information discovered via static 
routes will be redistributed. Static routes are those created 
using the ip route command detailed in 

metric metric 
value

(Optional) Specifies a metric for the connected, RIP or 
static redistribution route. This value should be consistent 
with the designation protocol.

metric-type type 
value

(Optional) Specifies the external link type associated with 
the default connected, RIP or static route advertised into 
the OSPF routing domain. Valid values are 1 for type 1 
external route, and 2 for type 2 external route.

(Optional) Specifies that connected, RIP or static routes 
that are subnetted routes will be redistributed.