Epson 80211b User Manual

Configuring the print server is the process of setting it up to work with your 
network. This process begins immediately after you install the software, so 
it’s important to make sure your print server and printer are set up before you 
start installing. You also need to check that your wireless network adapter(s) 
and/or access point are installed and ready. 

Your EpsonNet 802.11b Wireless Print Server CD-ROM includes the 
following software:

■

WP-Admin

This utility lets you configure the print server for most network 
protocols. For most networks, it is the only configuration utility you need 
to install.

■

EpsonNet Direct Print

This software, which sets up a network printer port, must be installed on 
every Windows Me, 98, or 95 computer that uses the printer. 

■

XAdmin32

This utility lets you configure the print server for a Novell

®

 NetWare 

network and perform more advanced configuration for other protocols. 

Your print server also comes with a built-in web-based configuration utility, 
which enables you to change configuration settings from any computer on 
the wireless network that supports a standard web browser. You must 
configure the print server using WP-Admin or XAdmin32 before you can 
use this utility. 

To use the print server’s web-based configuration utility, 
start your web browser and enter the print server’s IP address. For 
more information about the web-based utility and XAdmin32, visit 
EPSON’s web site at support.epson.com. XAdmin32 also provides 
on-screen help.

ZLUHOHVVVHUYHUERRN3DJH)ULGD\0D\30