SonicWALL SSL-VPN 2000 User Manual
SonicWALL SSL-VPN 2000 Getting Started Guide Page 41
Scenario B: Allowing WAN -> DMZ Connection in SonicOS Enhanced
Follow this procedure if you are connecting your SonicWALL SSL-VPN 2000 to a
SonicWALL UTM appliance running SonicOS Enhanced. If your SonicWALL UTM
appliance is running SonicOS Standard, refer to “Scenario A: Allowing WAN -> DMZ
Connection in SonicOS Standard” on page 21.
SonicWALL UTM appliance running SonicOS Enhanced. If your SonicWALL UTM
appliance is running SonicOS Standard, refer to “Scenario A: Allowing WAN -> DMZ
Connection in SonicOS Standard” on page 21.
Create a public server access rule for HTTP and HTTPS traffic:
Note:
If you are already forwarding HTTP or HTTPS to an internal server, and you only
have a single public IP address, you will need to select different (unique) ports of
operation for either the existing servers or for the SonicWALL SSL-VPN appliance,
because both cannot concurrently use the same IP address and port combinations.
operation for either the existing servers or for the SonicWALL SSL-VPN appliance,
because both cannot concurrently use the same IP address and port combinations.
1.
In the SonicOS Enhanced management interface, click the Wizards icon at the top
right of the window.
right of the window.
2.
On the Welcome page, select the Public Server Wizard and then click Next.
3.
In the Public Server Type page, select:.
The Add Service Group dialog box is displayed.
Server Type
Other
Services
Create new group