Dynalink RTA1046VW User Manual

Wireless IAD User Manual 

 

Therefore, when the log level is 
“Debugging” and the display level is 
“Error”, the CPE logs the most 
detailed message but shows error 
level data only. 

Mode:   
You can choose where to store the 
logs; the options include Local, 
Remote and Both. Local means the 
CPE, i.e., the wireless IAD. Remote 
means the log server you specified to 
forward the log information to. The 
default mode is Local.  

If you choose Remote or Both, you 
have to specify the Server IP 
Address and UDP Port, and all the 
events will be sent to the specified 
UDP port of the specified log server.   

Note:  
Display Level only filters for the local 
side. All the messages will be 
displayed on the remote Log Server. 

 

 
 

 

 

Suppose we are going to record the system logs on both the wireless IAD and the 

Server bearing IP address 10.11.95.2

, the procedures below illustrate the situation: 

   

1. Choose 

Enabled Log.  

2. Select 

Debugging as the Log 

Level, and Error as the Display 
Level. (Or select other level 
according to your needs.) 

3. Set 

the 

Mode as Both, key in the 

Server IP Address as 10.11.95.2, 
and leave the Server UDP Port 
as the default value 514. 

4. Press 

Apply to invoke the 

settings.