Dynalink RTA1046VW User Manual

Wireless IAD User Manual 

 

This allows you to set DHCP server on LAN interface. 

DHCP Server On: 
Check this item if DHCP service is 
needed on the LAN. The IAD will 
assign IP address and gateway 
address for each of your PCs.   

You have to key in Start IP Address, 
End IP Address, and Lease Time. 
The default lease time is 1day. 

 

 

Relay On:   
Click this button to have a relay 
setting. And type the Server IP in the 
IP field.   

When the DHCP server is served by 
another device rather than the IAD 
itself, you can relay to that specific 
server and enter the IP address of it, 
as 10.3.95.2 in our example. 

Server and Relay Off:   
Check this item if DHCP service isn’t 
needed on the LAN.   

Apply: 

 

Click this button to activate the 
settings listed above.   

 

You can reserve one specific IP 
address for a certain PC for particular 
purpose. Simply add a mapping entry 
of MAC address & IP address for that 
PC by pressing the Reserved IP 
Address List button. The window as 
the one shown in the right column will 
appear. 

Click the Add button to open another 
dialog window, shown as the right. On 
PC’s MAC Address and Assigned IP 
Address boxes, please type the 
correct information according to your 
need and click Apply.