Enterasys Networks 1G58x-09 User Manual
Security Configuration Command Set
Configuring Flow Setup Throttling (FST)
14-106
Command Defaults
None.
Example
This example shows how to enable FST on Fast Ethernet front panel ports 1-5:
14.3.9.3 set flowlimit limit
Use this command to set a flow limit and an action for a port user classification. Once configured,
this action can be assigned to one or more ports using the set flowlimit class command as described
in
this action can be assigned to one or more ports using the set flowlimit class command as described
in
set flowlimit limit {1 | 2} {aggregationport | interswitchlink | serverport |
unspecified | userport} limit [discard | drop | trap | disable]}
unspecified | userport} limit [discard | drop | trap | disable]}
Syntax Description
Matrix>set flowlimit fe.0.1-5 enable
1 | 2
Specifies this configuration as action 1 or 2. Two actions
describing what will occur when a certain flow limit is
reached can be defined per user classification.
describing what will occur when a certain flow limit is
reached can be defined per user classification.
aggregationport |
interswitchlink |
serverport |
unspecified |
userport
interswitchlink |
serverport |
unspecified |
userport
Assigns this action configuration to the user classification
port type:
port type:
•
aggregation port
•
inter-switch link
•
server port
•
user port
•
unspecified port
limit
Specifies the number of flows that will trigger this action
configuration. Valid values are 0 - 128000.
configuration. Valid values are 0 - 128000.