Emerson AMC-S402 User Manual

Specifications

5.3 Power Requirements

The AMC-S402 shall consume no more than the following from the system supplies

under normal operating conditions.

Table 9 Power Requirements

Part number

AMC-S402xxx

Management Power
(MP)

100mA

+12V (spin up < 100

sec)

1.5A (18W)

+12v normal operating

0.9A (10.8W)

+12v (idle)

0.5A (6W)

OFF STATE

LESS THAN 0.4W

5.4 EMC Compliance

This product was tested in an EMC-compliant chassis and meets the requirements

for EN55022 Class A equipment. Compliance was achieved under the following

conditions:

 Conductive chassis rails connected to earth ground, providing the path for

connecting shields to earth ground

 Front panel screws properly tightened

For minimum RF emissions, it is essential that the conditions above be
implemented. Failure to do so could compromise the EMC compliance of the

equipment containing the module.

6806800H60A AMC-S402 Installation and Use