Grandstream Networks GXW40XX User Manual
Grandstream Networks, Inc.
GXW40XX User Manual
Page 5 of 38
Firmware 1.0.4.2
Last Updated: 06/2011
C
ONNECT YOUR
GXW40XX
GATEWAY
Connecting the GXW40XX gateway is easy. Before you begin, please verify the contents of the
GXW40XX package.
GXW40XX package.
E
QUIPMENT
P
ACKAGING
Unpack and check all accessories. Equipment includes:
• one device unit
• one RJ45 Ethernet cable
• one 12V universal power adapter
• one 12V universal power adapter
C
ONNECT THE
GXW40XX
Follow these four (4) steps to connect your GXW40XX gateway to the Internet and access the unit’s
configuration pages.
configuration pages.
1. Connect standard touch-tone analog phones to the FXS ports.
2. Insert an RJ45 Ethernet cable into the WAN port of GXW400X and connect the other end to an
uplink port (a router or a modem, etc.) Note: If the gateway is used in router mode, connect a PC
to the LAN port of GXW400X for initial configuration. In case of GXW4024, there is only one
Ethernet port.
to the LAN port of GXW400X for initial configuration. In case of GXW4024, there is only one
Ethernet port.
3. Plug the power adapter into the GXW40XX gateway into a power outlet.
Follow the instructions from the topic “
” for initial configuration.
The GUI pages will guide you through the remaining steps to set-up your gateway. Examples of the GUI
Interfaces can be downloaded from
Interfaces can be downloaded from
:
F
IGURE
1:
D
IAGRAM OF
GXW4004-8
AND
GXW4024
B
ACK
P
ANEL
LAN/WAN
RJ-45 Ethernet
Ports
FXS
Ports
Console
Connection
(PC
connection)
GXW 400x
PSTN
Line
Power
Supply
Supply
Reset
GXW 4024