Dynex DX-E401 User Manual
Configuring the router
13
16 If you selected
PPP over Ethernet (PPPoE)
, the Set PPPoE screen opens.
Note - Make sure that you remove any existing PPPoE client software installed
on your computers.
17 Type the Username and Password provided to you by your ISP, and type
the Service Name if your ISP uses a service name for the PPPoE
connection.
connection.
18 Click
Next.
The Setup Completed screen opens.
19 Click
Restart.
The router saves the changes and reboots.
20 Click
Close
. The router setup is now complete, and you should be able to
access the Internet.
Configuring the router
Whenever you want to reconfigure your network or the router, you can access the
Web-based configuration utility by opening your Web browser and typing in the
IP Address of the router. The default IP Address is:
Web-based configuration utility by opening your Web browser and typing in the
IP Address of the router. The default IP Address is:
192.168.0.1
(also see Start-up
and Log in on page 8).
To access the Web-based configuration utility:
1 Open your Web browser.
2 Type in the IP Address of the router (
2 Type in the IP Address of the router (
http://192.168.0.1
).